Accutroll Mobile App

The Accutroll mobile app is your command center for managing and controlling your Accutroll devices. Available for both iOS and Android, the app provides intuitive control of your Throttle Control Module (TCM) and seamless integration with your NMEA2000 WiFi Gateway and Bluetooth Remote.

Key Features

  • Device Discovery & Management - Easily scan QR codes to add and manage your Accutroll devices
  • Throttle Control - Precise manual control with slider, jog wheel, and nudge controls
  • Automated Cruise Control - Set and maintain your desired trolling speed automatically
  • Speed Feedback - Real-time speed data from your NMEA2000 network via GPS or paddle wheel sensors
  • Firmware Updates - Keep your devices up-to-date with over-the-air firmware updates
  • Device Linking - Wirelessly connect your TCM and Gateway for automated throttle control
  • Preset Speeds - Save and recall your favorite trolling speeds with one tap
  • Bluetooth Remote Support - Pair and configure the Accutroll RC-01 remote control

Download the App

Get started with the Accutroll app today:

Download on Google Play Download on the App Store

System Requirements

iOS

  • iOS 13.0 or later
  • iPhone, iPad, or iPod touch
  • Bluetooth and WiFi capabilities

Android

  • Android 7.0 (Nougat) or later
  • Bluetooth and WiFi capabilities

Using a Dedicated Device for Accutroll

Don’t want to tie up your everyday phone? Consider using a dedicated device for your Accutroll system!

Many boaters repurpose an old smartphone that’s sitting unused in a drawer. Most people have one or two older phones collecting dust after upgrading—typically still fully functional for Wi-Fi and Bluetooth tasks. Installing the Accutroll app on one of these devices breathes new life into otherwise idle electronics and keeps your primary phone free for calls, photos, navigation, and other on-the-water needs.

Benefits of a Dedicated Device

  • No cellular service required - Only WiFi and Bluetooth needed
  • Simple setup - Factory reset the old phone if desired, connect to Wi-Fi briefly to download and install the app
  • Always ready - Leave it dedicated in the boat, mount it securely (e.g., RAM mount) and wire it into your vessel’s power for reliable, always-ready control without draining your daily driver’s battery
  • Cost-effective - Uses hardware you already own
  • Environmentally friendly - Reuses old electronics instead of discarding them

Don’t Have a Spare Phone?

Another solid option is to buy a refurbished or low-cost used Android device from Amazon, eBay, or similar retailers. Look for models from the last 4-6 years. Even mid-range older phones work reliably with the Accutroll app and often cost under $100.

This approach gives you maximum flexibility and convenience on the water while being cost-effective and environmentally friendly by reusing old hardware.


Getting Started

Once you’ve installed the app:

  1. Grant Permissions - Accept all permission requests (Bluetooth, Location, WiFi) when prompted for full functionality
  2. Scan QR Codes - Use the app to scan the QR code labels on your Accutroll devices
  3. Connect & Configure - The app will automatically discover and configure your devices
  4. Start Trolling - Begin using your Accutroll system for precision throttle control

Need help? Check out our TCM Installation Guide, Gateway Installation Guide, or Troubleshooting Guide for detailed instructions.


Support


Table of contents


Copyright © 2025-2026 Innotech Marine