New device setup

This guide will walk you through setting up a new Accutroll device, such as a throttle control module (TCM) or the NMEA 2000 Wi-Fi Gateway.

Important: Before starting, ensure your devices are powered on before proceeding.

Install App

You can download the Accutroll app on your Android or Apple smartphone using the links below.

Once installed, launch the app and you’ll be given an option to scan for a device.

Note: if you’ve already setup a device, you can skip the next step and press “+ Add New Device” from your saved devices list.

Scan your device

After pressing “Scan device”, locate the barcode on the rear of the device. Point your phone’s camera and the app will detect the barcode and automatically connect to it. If prompted to join the network, press “Join.” The app will connect to the device and begin retrieving its details.

Once the device(s) have been found, press “Save All Device Profiles.” The device will now appear in your saved devices list. From this list, you can tap on the device to launch it.