Using the Remote
The RC-01 pairs to your phone, not the TCM. The Accutroll app translates Bluetooth Low Energy (BLE) commands from the remote over Wi-Fi to the TCM. The app must stay in the foreground while you use the remote.
Connect before opening the TCM UI
Connect the remote from the Device List before you open the TCM UI.
- A green Bluetooth icon on the remote’s tile means it is connected.
- A slash through the Bluetooth icon means it is not connected—tap the tile to reconnect.
Connect the remote (green Bluetooth icon) before opening the TCM UI. Pairing can fail the first time; retry while the remote is advertising (blue blink on Idle/Resume / play-pause).
See Pairing and Connecting for the full pairing and session-connect steps.
Default button behavior
These are the factory defaults. Plus and Minus can be reassigned in Configure. Speed Lock and Idle/Resume are fixed.
| Button | Single | Double |
|---|---|---|
| Plus | +1% throttle or cruise speed | +5% |
| Minus | −1% throttle or cruise speed | −5% |
| Idle/Resume | Idle (0%) | Resume previous throttle |
| Speed Lock | Cruise at current speed | Cancel cruise |
Canceling a macro
To cancel a running macro, tap anywhere on the screen or press any button on the remote.
The overlay reads: Macro running. Tap anywhere to cancel.