Installing Motor Fitment Kit - Yamaha (02)
Mechanical installation for Motor Fitment Kit - Yamaha (02).
This kit fits:
- Yamaha 25 HP EFI (2017–present), tiller handle
- Yamaha 25 HP EFI (2017–present), forward remote
Written photo steps for this kit are not published yet. Use the install video that matches your control type.
Table of contents
These clips are shop-floor installs, not complete photo guides. The same kit and the same bracket bolt location are used for tiller and forward remote.
Tiller handle
On tiller, the friction knob must be completely loose or the servo overloads (it rotates the tiller grip). Attach the spool / set screw before zip-tying, or you cannot reach the set screw through the top of the round horn. Press-fit is a fallback. Zip ties hold the servo.
Forward remote
Forward remote needs the extra elongated-slot control-cable end so the binnacle and the servo can both actuate independently. Do not skip this. Do not confuse this EFI kit with Yamaha (03) (carb).
Next Steps
After completing the mechanical installation:
- Proceed with TCM power wiring and mounting (see the main TCM Installation Guide).
- Connect the servo to the TCM.
- Mount the TCM using the supplied ALFA-LOK fasteners.
- Discover the device in the Accutroll app.
- Calibrate the servo sweep range.
Need Help?
- Email Support: support@accutroll.com
- Contact Form: accutroll.com/pages/contact