Installing Motor Fitment Kit - Suzuki (01)
Mechanical installation for Motor Fitment Kit - Suzuki (01).
This kit fits:
- Suzuki 9.9 HP EFI (2014–present)
- Suzuki 15 HP EFI (2014–present)
- Suzuki 20 HP EFI (2014–present)
Written photo steps for this kit are not published yet. Use the install video below.
Table of contents
Install video
This clip is a shop-floor install, not a complete photo guide.
Forward-remote and tiller installs are the same except forward-remote needs the elongated-slot control-cable end so the binnacle and the servo can both actuate throttle. The side panel must come off to reach it (not shown in the clip).
Reuse a factory bolt for the bracket. The servo is held with zip ties. Loop the braid on the throttle, through the bracket eyelet, onto the round spool.
The demo is a 9.9 HP forward-remote. The kit also fits 15 HP and 20 HP EFI, as listed above.
Next Steps
After completing the mechanical installation:
- Proceed with TCM power wiring and mounting (see the main TCM Installation Guide).
- Connect the servo to the TCM.
- Mount the TCM using the supplied ALFA-LOK fasteners.
- Discover the device in the Accutroll app.
- Calibrate the servo sweep range.
Need Help?
- Email Support: support@accutroll.com
- Contact Form: accutroll.com/pages/contact